One of the biggest downfalls of owning a first generation PlayStation 3 console is that the console is highly susceptible to errors and problems. There are a number of different issues that can arise within the console, as sometimes people have reported, that it fails to give a display or at times the graphics are not fully up to the standard. The biggest problem to have ever occurred within the PlayStation 3 is the presence of the yellow light of death, which is highly similar to the Red Ring of Death error that was common with Xbox 360 consoles.
The Yellow Light of Death error causes your console to prevent from booting up and renders it permanently useless. Another big issue that comes from this error is that it can never be resolved on a permanent basis, so if you own a console that has the Yellow light of death error, you might as well scrap it and get a newer one. However, a lot of people try the yellow light of death fix in order to see if their console can be repaired and there are a few people who have also reported that once they have applied the fix to their consoles, it has been working fine ever since. There are two ways by which you can get the Yellow light of death issue resolved in your PlayStation 3. One of the simplest methods is to take the console to a professional repairing expert within your vicinity and give your console to him.
However, they will charge money for the services, so people who do not want to pay anything for getting their consoles fixed might want to try out the yellow light of death fix online guide. The online guide is available for free from some sources, while others are charging money for it. Locate a free guide from the internet and then just do exactly as mentioned. There are a few items that you will require in order to make sure that you are able to repair your console properly. You will require alcohol, a compressed air blower, a screwdriver which will be used in-order to open the console up and a heat gun, which is important.
The first step is to open up the console. Find all the screws in your console and detach it in order to remove the top cover. Once the slightly curved portion of your console has been removed, the next step is to remove the hard disk bay. This is locked at first in place, so you will have to open more screws in order to get to the bay. Remove it and keep it aside. Once you remove that, you will get access to the Blu-Ray player. Loosen up all the screws from the sides of the player and you will begin to see the heat sinks on the console.
Use your fingers in order to gently check out the heat sinks. If you find that any one of the heat sinks is not properly secure to its place, you will know the reason for the Yellow light of death error. The yellow light of death fix allows you to repair the heat sinks and to get your console running back up by properly applying thermal paste and putting the heat sinks back in their normal state. However, regardless of the method that you use, one thing that you need to know is that none of the repairing methods are permanent and the errors might return to your console very soon, so it is just a chance that you will be taking.
It is always a better option to get your PlayStation 3 repaired quickly and as soon as it gets faulty so that you do not risk it further getting any problems. A PlayStation 3 console is very precious for many people and hence it should be taken care of.
Click here for PlayStation 3 Repair.
Find More Playstation Articles